|
|
|
Pumps - Sewage
Berkeley Pumps
As Berkeley Dealers we sell, maintain and service on site. All warranties are handled at our location.
 |
SC4 Series
The SC4 Series Pump is a rugged, cast iron, submersible pump with a non-clog vortex impeller and solids handling capability to 2".
- Bearing and Mechanical Seal - Permanently lubricated for long life.
- Stainless Steel Hardware - Allows easy disassembly after extended service.
- Overload Protection - Built-in thermal overload with automatic reset.
- Solid Handling - 2" spherical solids handling capabilities.
Literature
|
|
 |
SC5 Series
The SC5 Series pump is a rugged, cast iron, submersible pump with a non-clog vortex impeller and solids handling capability to 2".
- Bearing and Mechanical Seal - Permanently lubricated for long life.
- Stainless Steel Hardware - Allows easy disassembly after extended service.
- Overload Protection - Built-in thermal overload with automatic reset.
- Solid Handling - 2" spherical solids handling capabilities.
Literature
|
|
 |
SC6 Series
The SC6 Series pumps are rugged, cast iron, submersible pumps with non-clog semi-open vane impellers and solids handling capability to 2".
- Bearing and Mechanical Seal - Permanently lubricated for long life.
- Stainless Steel Hardware - Allows easy disassembly after extended service.
- Overload Protection - Built-in thermal overload with automatic reset.
- Solid Handling - 2" spherical solids handling capabilities.
Literature
|
|
 |
SC7 & SCC7 Series
The SC7 and SCC7 Series pumps are rugged, cast iron, submersible pumps with non-clog vortex impellers and solids handling capability to 2".
- Bearing and Mechanical Seal - Permanently lubricated for long life.
- Stainless Steel Hardware - Allows easy disassembly after extended service.
- Overload Protection - Built-in thermal overload with automatic reset.
- Solid Handling - 2" spherical solids handling capabilities.
Literature
|
|
 |
SC9 & SCC9 Series
Our best, the SC9/SCC9 Series pump is a rugged, cast iron, submersible pump with a non-clog, two-vane semi-open impeller and solids handling capability to 2".
- Impeller - Non-clog two vane semi-open style
- Dual Shaft Seals - Primary mechanical seal with a secondary self-lubricating lip seal.
- Seal Plate Barrier Ring- The seal plate barrier ring protects the seals from debris.
- Solid Handling - 2" spherical solids handling capabilities.
Literature
|
|
 |
SP4 Series
The SP4 Series pre-plumbed sewage system is a rugged, high quality product consisting of our new SC4 Series 4/10 HP, 115V cast iron and composite sewage pump.
- Discharge - Corrosion-resistant fiberglass reinforced thermoplastic for durability in aggressive water.
- Injected-Molded Structural Foam - Provides the highest quality construction for uniform wall thickness and strength.
- Overload Protection - Built-in thermal overload with automatic reset.
Literature
|
|
 |
SP5 Series
The SP5 Series pre-plumbed sewage system is a rugged, high quality product consisting of our popular SC5 Series 1/2 HP, 115V cast iron sewage pump.
- Split Cover - Gas-tight and allows for easy pump access with minimal disassembly
- Injected-Molded Structural Foam - Provides the highest quality construction for uniform wall thickness and strength.
- Overload Protection - Built-in thermal overload with automatic reset.
Literature
|
|
 |
SG Serieis
This rugged cast iron submersible pump provides capacities to 42 GPM and heads to 112 feet.
- Duty - Pumps are rated 105 degrees Fahrenheit continuous, 122 degrees Fahrenheit intermittent.
- Motor - Dry motor design: Capacitor start/capacitor run which provides maximum starting torque required to start with trash.
- Shaft - Stainless steel eliminates corrosion and fatigue for longer pump life. Short shaft extension to reduce deflection and prolong seal and bearing life.
- Impeller - Cast iron 10 vane for maximum clearing of particles.
Literature
|
|
 |
SG / SGC Series Commercial
The SG/SGC Grinder Pump is a rugged cast iron submersible pump that provides capacities to 160 GPM and heads to 150 feet.
- Motor Shaft - Stainless steel with ball bearing support.
- Dual Shaft - Seal isolates motor from sewage.
- Internal Oil Reservoir - Lubricates shaft seals.
- Impeller - Non-overloading design provides maximum force over entire power curve.
Literature
|
|
 
|
|
|
